|
 Model
CN Vacuum Oven
The
Model CN is a conductive platen type vacuum oven. Its
energy source is an electrically heated platen or shelf.
The shelving units are typically constructed of either
stainless steel or aluminum, depending on application. These
ovens are primarily used in applications where high
uniformity, control stability and rapid heating/cooling
abilities are needed.
Temperature capabilities include:
Electrically heated platens are individually controlled
ensuring maximum uniformity and stability. It also gives
you the ability to set platens up to operate at different
temperatures. Electrically heated
 platens
are easy to remove and clean, which make them ideal for high
purity and clean room applications. The number of platens
in the chamber are specified by the customer and is usually
determined by the minimum distance between platens. The
platens can be liquid cooled to promote rapid cooling and
precision temperature control. Cooled platens come fully
plumbed and ready for operation and require a static drain
for pre-heating platen purging. Control type, pumps, traps
and other options and accessories are all configurable on
the Model CN.
The
advantages of Model CN include precision control, uniformity
and rapid heating & cooling.
Extremely effective in the following process:
Download the Model CN
Brochure
Available Chassis Designs & General Specifications
|
Utility Information |
18CN |
24CN |
36CN |
|
Interior Height |
18-in |
24-in |
36-in |
|
Interior Width |
18-in |
24-in |
36-in |
|
Interior Depth |
24-in |
30-in |
36-in |
|
Exterior Height |
80-in |
80-in |
92-in |
|
Exterior Width |
49.5 |
49.5-in |
63-in |
|
Exterior Depth |
39-in |
39-in |
51-in |
|
Platen Width X Depth |
17.5-in x
17.5-in |
23.5-in x
23.5-in |
35.5-in x
30.0-in |
|
Minimum distance between platens |
2.5-in |
3.5-in |
6.0-in |
|
Watts per platen @ 5-wpsi |
1500-watts |
2700-watts |
5300-watts |
|
Temperature Uniformity |
±1°C |
±1.7°C |
±2.2°C |
|
Maximum Continuous Operating Temperature |
350°C - Al
400°C SS |
350°C - Al
400°C SS |
350°C - Al
400°C SS |
|
Time to Heat to 200°C |
10-mins |
12-mins |
16-mins |
|
Controllable Vacuum Level Capability |
5 x 10-7
- Torr |
5 x 10-7
- Torr |
5 x 10-7
- Torr |
|
Compressed Air Requirements |
90-psi @ 2-scfm |
90-psi @ 2-scfm |
90-psi @ 3-scfm |
|
Over~Temp Protection |
Standard
stand-alone controller with manual reset |
Standard
stand-alone controller with manual reset |
Standard
stand-alone controller with manual reset |
|
Code Conformances |
NFPA 79 / UL
recognized components |
NFPA 79 / UL
recognized components |
NFPA 79 / UL
recognized components |
Download the Model CN
Brochure
or
Get an e-mailed estimate
using our Online Configurator |
